Build Your Own Manger Instructions

1. Gather Materials
   A) 2 Bed Pieces
   B) 2 End Pieces
   C) 4 Leg Pieces
   D) 14 Wood Pegs
   Hammer and Sandpaper

2. Sand any rough edges.

3) Take two Leg Pieces and fit them together.

Be sure the angled ends look like they do in the picture.

4) Hammer a peg into the hole in the middle of the legs.

5) Repeat Steps 3-4 with the remaining two legs.

6) Line up 1 End piece on 1 set of Legs.

7) Hammer a peg into the bottom right hole on the End Piece. The peg will connect the End Piece to the Legs.

8) Hammer a peg into the bottom left hold on the End Piece. This peg will connect the End Piece to the Legs. This creates a Manger Side.

9) Repeat Steps 6-8 to make a second Manger Side.

10) Fit 1 Manger Side to the end of 1 Bed Piece. Hammer 2 pegs through the Manger Side to connect the Bed Piece.

11) Fit the other Bed Piece into the Manger Side. Hammer 2 pegs to hold together.

12) Fit your other Manger Side to the other end of the Bed Pieces. Hammer Pegs in the remaining holes to hold in place.